There's a little MacGyver in all of us. And when it comes to DIY, who couldn't use another shortcut? Whether your toolbox is fully stocked or you're slowly acquiring items from your wish list, whether you're an old pro or a newbie, the tricks of the trade can make your next DIY project (or emergency) a lot smoother -- and smarter. Add these toolbox hacks to your artillery, and streamline your next project.
DIY a Paint Thinner
has long been an essential weapon in the DIYer's home arsenal, but its strong fumes can make it tough to be around. You can create your own oil-based paint thinner with a quarter cup of lemon oil and a cup of linseed oil. Mix it into your paint little by little until it's the right consistency.
Cook Up a Batch of Concrete
If a dedicated
is a luxury you can't afford, improvise your own. You can mix small batches using a power drill fitted with a whisk; for larger amounts, shell out for a concrete mixer bit.
Fill Holes in Wood
is pretty cheap, but if a trip to the hardware store isn't in your future, it's easy enough to make yourself. For a perfect color match, use sawdust from the damaged furniture. Mix one part sawdust with three parts glue, and apply to the hole. Wait for it to dry, then sand.
Mix Your Own Paint
Yes, really, you can
using only skim milk (go figure) and powdered pigment. If that's not your style, you can turn ordinary flat-finish paint into chalkboard paint by adding two tablespoons of tile grout to every cup of paint. Smooth with fine sandpaper after the paint dries.
Make a Mini Sander
For sanding very small details, a mini orbital sander will come in handy. To make your own, just remove the bristles from the brush head of an old electric toothbrush, and replace with self-stick
Imitate a Phillips
Everyone should own a
. In fact, if you don't have one, stop reading this and go buy one right now. But if you find mid-job that you've misplaced yours, a metal vegetable peeler works in a pinch.
Remove Stripped Screws
Often caused by using the wrong size screwdriver,
can be a pain to deal with. The easiest way to remove them is with an extractor, but if you don't have one, try this: Place a wide rubber band over the screw's head, and insert your power drill to unscrew.
DIY Paint Brush Holder
Some of us are
, and then others are pros at letting our brushes slip into a full paint pan. Prevent this by cutting foam pipe insulators to fit the side of a paint tray, and then making slits along the length. If you need to step away, just stick the brush in the foam.
Photo: Dream a Little Bigger
Never Lose Another Nail
Magnetic tools can make many DIY tasks much easier by keeping small nails and screws nearby when needed. To hack an
, glue a magnet to the bottom of the handle so you can take your nails wherever you go--without ever having to stick them in your mouth.
Catch All the Crumble
While you likely don't keep Post-It notes in your toolbox, you probably should. Next time you're
, stick one to the wall just under the hole you're drilling, and fold the bottom up to meet the top--the crease will catch the dust.
For more from BobVila.com: